Design tools
32 online calculations grouped by Indian Standard. Equivalent Eurocode parts are shown for engineers moving between the two systems.
IS 875: Design loads for buildings and structures
cf. EN 1990 / EN 1991Wind pressure
Design wind speed Vz = Vb k1 k2 k3 k4 at each height, wind pressure pz = 0.6 Vz², design pressure pd = Kd Ka Kc pz, the height profile of a building, and net wall pressures using external (Table 5) and internal pressure coefficients.
Clauses 5.3, 6.3, 6.3.1, 6.3.2Load combinations
Generates ultimate and serviceability limit state load combinations with partial safety factors for dead, imposed, wind and earthquake loads, including ±X/±Y directions and the 100% + 30% orthogonal rule for earthquake.
Clauses IS 456 Table 18, IS 800 Table 4, IS 875 (Part 5) cl. 8, IS 1893 (Part 1) 6.3IS 456: Plain and reinforced concrete
cf. EN 1992Concrete design properties
Characteristic and design properties of all concrete grades M15 to M80: design strength, modulus of elasticity, flexural strength, maximum shear stress, bond stress and limiting moment coefficients.
Clauses 6.1 & Table 2, 6.2.2, 6.2.3.1, 26.2.1.1Nominal cover
Determines the nominal cover to reinforcement from exposure condition (Table 16), fire resistance (Table 16A) and the member-specific minimums for columns and footings.
Clauses 8.2.2.1 & Table 3, Table 5, 26.4, Table 16Development & lap length
Design development length Ld of bars in tension and compression, including deformed bar and bundled bar factors, with lap lengths for flexural tension, direct tension and compression, plus a full table for all bar diameters.
Clauses 26.2.1, 26.2.1.1, 26.2.1.2, 26.2.3Rebar area tables
Cross-sectional area of 1 to 12 bars, mass per metre, and area per metre width for common spacings, for bar diameters 6 mm to 40 mm (IS 1786).
Clauses IS 1786, SP 16 Tables 95–96Rectangular beam — flexure
Limit state design of a rectangular reinforced concrete section for bending: limiting moment Mu,lim, required tension steel, compression steel for doubly reinforced sections using the design stress-strain curve, and moment capacity of the provided bars.
Clauses 26.5.1.1, 38.1, Annex G-1.1, Annex G-1.2T / L beam — flexure
Effective flange width and limit state flexural design of monolithic T- and L-beams: neutral axis in the flange or web, limiting moment of the flanged section and required tension reinforcement.
Clauses 23.1.2, 38.1, Annex G-2.1, Annex G-2.2Shear design
Nominal shear stress, design shear strength of concrete τc from Table 19, maximum shear stress τc,max, and design of vertical stirrups including minimum shear reinforcement and maximum spacing.
Clauses 26.5.1.5, 26.5.1.6, 40.1, 40.2Torsion design
Design of rectangular beams for combined torsion, shear and bending by the IS 456 equivalent shear and equivalent moment approach: longitudinal steel for Me1 (and Me2 on the compression face), closed stirrups for torsion plus shear, and the spacing rules for torsion links.
Clauses 26.5.1.7, 41.1, 41.3, 41.4.2Deflection (span/depth)
Checks deflection of beams and slabs through the basic span/effective depth ratios of cl. 23.2.1 with modification factors for tension steel (Fig. 4), compression steel (Fig. 5), flanged sections (Fig. 6) and spans over 10 m.
Clauses 23.2, 23.2.1, Fig. 4, Fig. 5Crack width (SLS)
Serviceability check of flexural crack width: elastic cracked section analysis (neutral axis, steel and concrete stresses), average strain with tension stiffening, and the design surface crack width at the soffit between bars and at the corner, compared with the limits of cl. 35.3.2.
Clauses 35.3.2, 43.1, Annex B-1.3, Annex FOne-way / cantilever slab
Design of slabs spanning in one direction: loads, bending moments (with the Table 12 and 13 coefficients for continuous slabs), main and distribution reinforcement with spacing limits, shear and the span/depth deflection check.
Clauses 22.5, 24.4, 26.3.3(b), 26.5.2.1Two-way slab
Design of rectangular slabs spanning in two directions for any of the nine edge conditions of Table 26 or simply supported (Table 27): moments, reinforcement in both directions, spacing limits, shear and span/depth deflection check.
Clauses 24.4, 26.3.3, 26.5.2.1, 23.2.1Column — biaxial bending
Short and slender rectangular columns under axial load and biaxial moments: minimum eccentricity, additional moments for slender columns, P–M interaction diagrams by strain compatibility, Puz and the Bresler-type interaction check of cl. 39.6.
Clauses 25.1.2, 25.4, 26.5.3.1, 39.1Isolated footing
Design of a rectangular pad footing of uniform thickness for a concentric column load: plan size from safe bearing capacity, bending at the column face, one-way and two-way (punching) shear, development length, bearing at the column base and reinforcement distribution.
Clauses 31.6.3, 34.1, 34.2.3, 34.2.4IS 800: General construction in steel
cf. EN 1993Steel grades & strengths
Yield stress by thickness, ultimate tensile stress and design strengths fy/γm0 and fu/γm1 for IS 2062:2011 grades E250 to E650, with the elastic constants of IS 800.
Clauses 2.2.4, Table 1, Table 5, IS 2062 Table 2ISMB / ISHB properties
Dimensions, area, mass, second moments of area, radii of gyration, elastic and plastic section moduli, torsion and warping constants of Indian Standard medium weight beams (ISMB) and heavy weight columns (ISHB).
Clauses IS 808, SP 6(1), Annex E (It, Iw)Tension member — bolted plate
Design tensile strength of a flat plate with a bolted end connection: gross section yielding, net section rupture and block shear, together with the bolt spacing and edge distance rules of IS 800.
Clauses 6.1, 6.2, 6.3.1, 6.4.1Compression member
Design compressive strength of rolled I-section columns (ISMB / ISHB): section classification, effective lengths, buckling class from Table 10, non-dimensional slenderness, stress reduction factor χ and design strength Pd about both axes.
Clauses 3.7, 3.8, 7.1.2, 7.1.2.1Steel beam (incl. LTB)
Design of a simply supported rolled I-beam (ISMB/ISHB) under uniformly distributed load: classification, design bending strength for laterally supported and unsupported beams (elastic critical moment Mcr, χLT), shear strength with high-shear interaction, web shear buckling limit and serviceability deflection.
Clauses 5.6.1, 8.2.1.2, 8.2.2, 8.2.2.1Beam-column (P + M)
Member design of rolled I-sections under axial compression and bending about both axes: section classification with axial load, design compressive and bending strengths including lateral-torsional buckling, the cross-section check of cl. 9.3.1 and the overall member buckling checks of cl. 9.3.2.2.
Clauses 7.1.2, 8.2.2, 9.3.1.1, 9.3.2.2Bolted connection
Design strength of bolts per IS 800: shear on threads and shank, bearing on plates with kb, reductions for long joints and large grip, tension capacity, combined shear and tension interaction, and slip resistance of HSFG bolts.
Clauses 10.2, 10.3.2, 10.3.3, 10.3.4Fillet weld
Design strength of fillet welds: throat thickness from the fusion face angle, effective length, long joint reduction, minimum and maximum weld size, and combined normal and shear stress check.
Clauses 10.5.2, 10.5.3, 10.5.4, 10.5.7Response spectrum
Design response spectra for rock, medium and soft soils with damping correction, and the design horizontal acceleration coefficient Ah(T) for a chosen zone, importance and response reduction factor — ready to export to analysis software.
Clauses 6.4.2, 6.4.3, 6.4.5, Fig. 2Seismic base shear (ESM)
Design horizontal seismic coefficient Ah, approximate natural period, design base shear VB with the minimum base shear check, and the vertical distribution of lateral forces and storey shears for regular buildings.
Clauses 6.4.2, 6.4.3, 7.2.1, 7.2.2Concrete testing: IS 456, IS 516, IS 1199
cf. EN 206 / EN 13791Cube test acceptance
Evaluates 28-day cube results: test result per sample (mean of 3 cubes, ±15% rule), groups of four non-overlapping consecutive results against the Table 11 mean criterion, individual results, statistics and the number of samples required for the quantity cast.
Clauses IS 456 cl. 15.2, 15.4, 16.1, Table 8Core test evaluation
Converts core crushing loads to core strength, corrects for length/diameter ratio, converts to equivalent cube strength and checks the IS 456 acceptance criterion (average ≥ 85% and each core ≥ 75% of the specified cube strength).
Clauses IS 516 (Part 4), IS 456 cl. 17.4UPV quality grading
Converts UPV transit times to pulse velocity at each test location, grades concrete quality to IS 516 (Part 5/Sec 1), flags doubtful zones, checks whether rebound hammer strength estimates are valid, and estimates crack depth by the indirect method.
Clauses IS 516 (Part 5/Sec 1), IS 516 (Part 5/Sec 4), IS 13311 (Part 1)Rebound hammer analysis
Reduces the rebound numbers of a test area (median, mean, scatter and rejection of an unreliable set) and estimates in-situ strength from a calibration line fitted to paired rebound and core/cube strengths of the same concrete.
Clauses IS 516 (Part 5/Sec 4), EN 12504-2 (data reduction), EN 13791 (calibration)Load test evaluation
Works out the test load (full dead load plus 1.25 × imposed load) and evaluates the measured deflections against the IS 456 criteria: maximum deflection limit 40l²/D, 75% recovery within 24 hours, and 80% recovery on a repeated test.
Clauses IS 456 cl. 17.6