Concrete cube test results — acceptance to IS 456
Evaluates 28-day cube results: test result per sample (mean of 3 cubes, ±15% rule), groups of four non-overlapping consecutive results against the Table 11 mean criterion, individual results, statistics and the number of samples required for the quantity cast.
References:IS 456 cl. 15.2cl. 15.4cl. 16.1Table 8Table 11
IndianCodeApplied — calculation report
| Calculation | Concrete cube test results — acceptance to IS 456 |
|---|---|
| Project | — |
| Engineer | — |
| Reference | — |
| Date |
Inputs
| Specified grade | M25 |
|---|---|
| 28-day cube strengths (MPa) | 31.5, 30.2, 32.8; 29.6, 31.1, 30.4; 33.2, 32.0, 34.1; 28.9, 30.6, 29.8; 31.8, 33.0, 32.2 |
| Established standard deviation (0 = use Table 8) | 0 MPa |
| IS 456 Table 11 version | As amended (Amendment 4): fck + 3 / fck − 3 for M15 and above |
| Quantity of concrete represented | 75 m³ |
Results meet the acceptance criteriaGoverning: (cl. 15.2.2)
100%max. utilisation
Test results
5
Mean strength
31.41 MPa
Lowest test result
29.77 MPa
Required group mean
28.5 MPa
Standard deviation (sample)
1.37 MPa
Design checks 3
| Check | Clause | Demand | Limit | Utilisation |
|---|---|---|---|---|
| 15.2.2 | 5.000 | 5.000 | 100%OK | |
| Table 11 | 29.8 MPa | 22.0 MPa | 74%OK | |
| Table 11 | 31.2 MPa | 28.5 MPa | 91%OK |
- Test result
- Required group mean
- Individual minimum
- fck
| Sample | Cubes (MPa) | Test result (MPa) | Max. deviation from mean | Individual check |
|---|---|---|---|---|
| 1 | 31.5, 30.2, 32.8 | 31.50 | 4.1% | ✓ |
| 2 | 29.6, 31.1, 30.4 | 30.37 | 2.5% | ✓ |
| 3 | 33.2, 32.0, 34.1 | 33.10 | 3.3% | ✓ |
| 4 | 28.9, 30.6, 29.8 | 29.77 | 2.9% | ✓ |
| 5 | 31.8, 33.0, 32.2 | 32.33 | 2.1% | ✓ |
Detailed calculation
Sampling frequency
1
15.2.2
Test results (mean of each sample)
0
Acceptance criteria — IS 456 Table 11
5
Table 8
Table 11
Table 11
Table 11
1 later result(s) do not yet form a complete group of four.
Statistics
2
cl. 6.1
Scope, assumptions and limitations
- A test result is the average of the strengths of three specimens; the individual variation should not be more than ±15% of the average, otherwise the result is invalid (IS 456 cl. 15.4).
- Table 11 also has a provision for small pours with fewer than four samples, and requires further assessment (cl. 17) when the criteria are not met. Check the notes to Table 11 in the edition in force.