Load test on a slab or beam — test load and acceptance to IS 456
Works out the test load (full dead load plus 1.25 × imposed load) and evaluates the measured deflections against the IS 456 criteria: maximum deflection limit 40l²/D, 75% recovery within 24 hours, and 80% recovery on a repeated test.
References:IS 456 cl. 17.6
IndianCodeApplied — calculation report
| Calculation | Load test on a slab or beam — test load and acceptance to IS 456 |
|---|---|
| Project | — |
| Engineer | — |
| Reference | — |
| Date |
Inputs
| Effective span | 4.5 m |
|---|---|
| Overall depth | 150 mm |
| Full dead load (incl. finishes) | 5.25 kN/m² |
| Dead load already acting during the test | 3.75 kN/m² |
| Imposed load | 3 kN/m² |
| Max. deflection after 24 h under test load | 7.2 mm |
| Residual deflection 24 h after unloading | 1.4 mm |
| Test repeated after 72 h | No |
Results meet the acceptance criteriaGoverning: (cl. 17.6(a))
93%max. utilisation
Test load to apply
5.25 kN/m²
Deflection limit 40l²/D
5.40 mm
Recovery
80.6 %
Outcome
Acceptable
Design checks 1
| Check | Clause | Demand | Limit | Utilisation |
|---|---|---|---|---|
| 17.6(a) | 80.6 % | 75.0 % | 93%OK |
Detailed calculation
Test load
2
17.6
17.6
Deflection criteria
2
17.6(b)
17.6(a)
Scope, assumptions and limitations
- Carry out the test after 28 days, with safety props set just clear of the member and deflections measured from an independent reference frame.
- Correct deflection readings for support settlement and record temperature; load the member in increments and watch for distress.