IS 800:2007

Bolt group in shear and tension — bearing type and friction grip (HSFG) bolts

Design strength of bolts per IS 800: shear on threads and shank, bearing on plates with kb, reductions for long joints and large grip, tension capacity, combined shear and tension interaction, and slip resistance of HSFG bolts.

References:cl. 10.2cl. 10.3.2cl. 10.3.3cl. 10.3.4cl. 10.3.5cl. 10.3.6cl. 10.4.3cl. 10.4.5cl. 10.4.6
Design is adequateGoverning: (cl. 10.3.2)
92%max. utilisation
Report details
Design strength per bolt (shear) VdbV_{db}
45.26 kN
Group shear capacity nVdbn V_{db}
271.6 kN
Design tension per bolt TdbT_{db}
70.56 kN
Shear per bolt VsbV_{sb}
41.67 kN

Design checks 3

CheckClauseDemandLimitUtilisation
10.3.241.7 kN45.3 kN92%OK
10.2.260.0 mm50.0 mm83%OK
10.2.4.240.0 mm33.0 mm83%OK

Detailed calculation

Bolt properties

1
fub=400, fyb=240 MPa,Asb=314.2, Anb=245 mm2,d0=22 mmf_{ub} = 400,\ f_{yb} = 240\ \mathrm{MPa},\quad A_{sb} = 314.2,\ A_{nb} = 245\ \mathrm{mm^{2}},\quad d_0 = 22\ \mathrm{mm}
IS 1367, Table 19

Shear capacity of bolt

1
Vdsb=fub3 γmb (nnAnb+nsAsb)=4003×1.25(1×245+0×314.2)=45.26 kNV_{dsb} = \dfrac{f_{ub}}{\sqrt{3}\,\gamma_{mb}}\,(n_n A_{nb} + n_s A_{sb}) = \dfrac{400}{\sqrt{3} \times 1.25}(1 \times 245 + 0 \times 314.2) = 45.26\ \mathrm{kN}
10.3.3

Bearing capacity on plate

3
kb=min⁡(e3d0, p3d0−0.25, fubfu, 1)=0.606k_b = \min\left(\dfrac{e}{3d_0},\ \dfrac{p}{3d_0} - 0.25,\ \dfrac{f_{ub}}{f_u},\ 1\right) = 0.606
10.3.4
Vdpb=2.5 kb d t fuγmb=99.39 kNV_{dpb} = \dfrac{2.5\,k_b\,d\,t\,f_u}{\gamma_{mb}} = 99.39\ \mathrm{kN}
10.3.4
Vdb=min⁡(Vdsb, Vdpb)=45.26 kNV_{db} = \min(V_{dsb},\ V_{dpb}) = 45.26\ \mathrm{kN}
10.3.2

Tension capacity of bolt

1
Tdb=min⁡(0.9fubAnγmb, fybAsb γmbγm0)=70.56 kNT_{db} = \min\left(\dfrac{0.9 f_{ub} A_n}{\gamma_{mb}},\ \dfrac{f_{yb} A_{sb}\,\gamma_{mb}}{\gamma_{m0}}\right) = 70.56\ \mathrm{kN}
10.3.5

Bolt group

1
Vsb=Vun=250.06=41.67 kNV_{sb} = \dfrac{V_u}{n} = \dfrac{250.0}{6} = 41.67\ \mathrm{kN}
✓ OK · 92%InputsResults

Scope, assumptions and limitations

  • Net tensile stress area Anb is taken as the tensile stress area of the bolt (≈ 0.78 × shank area).
  • Slip factors depend on the faying surface treatment — confirm against IS 800 Table 20 for the specified surface.
  • The packing plate reduction βpk (cl. 10.3.3.3) is not applied.