Water permeability and absorption
Measures how easily water penetrates the concrete — a direct indicator of durability and of the quality of curing and compaction.
Standards:IS 3085 — permeability of cement mortar and concreteDIN 1048 / EN 12390-8 — depth of penetration under pressureBS 1881-122 — water absorption
Equipment
- Permeability cell and pressure apparatus
- Splitting jig to open the specimen
- Oven and balance (absorption)
Procedure
- Penetration under pressure (EN 12390-8): apply 5 bar water pressure to one face of a 150 mm specimen for 72 hours, split it and measure the maximum depth of the wet front.
- Absorption (BS 1881-122): oven-dry cores, immerse for 30 minutes and calculate the increase in mass as a percentage.
Results and acceptance criteria
- Typical project limits: maximum penetration ≤ 25 mm for high-durability concrete (≤ 50 mm in less severe exposures); 30-minute absorption below about 3% indicates low-absorption concrete. Use the values in the project specification.
This page summarises the procedure for site and laboratory use. Follow the current edition of the cited standards (with amendments) and the project specification, which govern.