Materials (before concreting)

Aggregates — crushing value, impact value, abrasion and shape

Assesses the strength, toughness and wear resistance of coarse aggregate and the proportion of flaky and elongated particles.

Standards:IS 2386 (Part 4) — crushing, impact, Los Angeles abrasionIS 2386 (Part 1) — flakiness and elongationIS 383 — limits

Equipment

  • Crushing value cylinder, plunger and base plate; compression machine (400 kN)
  • Impact testing machine (13.5–14 kg hammer, 380 mm drop)
  • Los Angeles abrasion machine with steel balls
  • Thickness gauge and length gauge
  • 12.5 mm, 10 mm and 2.36 mm sieves, tamping rod

Procedure

  1. Crushing value: fill the cylinder with 12.5–10 mm aggregate in three layers (25 tamps each), load to 400 kN in 10 minutes, and sieve on 2.36 mm.
  2. Impact value: fill the cup in three layers, apply 15 blows of the hammer, sieve on 2.36 mm.
  3. Los Angeles abrasion: rotate the graded sample with the specified number of balls for 500 (or 1000) revolutions and sieve on 1.70 mm.
  4. Flakiness/elongation: gauge each particle on the thickness gauge (flaky if thickness < 0.6 × mean size) and the length gauge (elongated if length > 1.8 × mean size).

Calculation

Value=mass passing the test sievetotal sample mass×100 %\text{Value} = \dfrac{\text{mass passing the test sieve}}{\text{total sample mass}}\times 100\ \%

Results and acceptance criteria

  • IS 383 limits: crushing and impact value ≤ 30% for wearing surfaces, ≤ 45% for other concrete; Los Angeles abrasion ≤ 30% for wearing surfaces, ≤ 50% otherwise.
  • Combined flakiness and elongation index: commonly limited to 40% (IS 383:2016).

This page summarises the procedure for site and laboratory use. Follow the current edition of the cited standards (with amendments) and the project specification, which govern.